Owner's manual

System Configuration and Setup 4-69
4.4.3 Height Sensor Setup
Setup Height Sensor allows you to establish parameters, such as speed and distance, for raising and
lowering the dispensing head.
To set up the Height Sensor:
1. In the Main Window, select
Configuration > Setup Height Sensor.
 The Height Sensor Configuration window opens. See Figure 4-63.
2. Click on the drop-down arrow next to the Height Sensor Type box and select the type of
Height Sensor installed on your system.
3. Select the options desired. See Table 4-10 for descriptions.
4. Click on
OK.
Figure 4-63 Height Sensor Configuration Window