Owner's manual

4-66 System Configuration and Setup
4.4.2.1.4 DP Series Valves
Item Description
Forward Speed:
Controls the forward valve motor speed. Higher values result in faster
motor speed. Lower values result in slower motor speed. Values can
range from 1 to 255.
Reverse Speed:
Controls the reverse motor speed. Higher values result in faster motor
speed. Lower values result in slower motor speed. Values can range
from 1 to 255.
Acceleration: Not available. Used only on X-1000 Series Dispensing Systems.
Prime/Home Timeout:
Establishes a maximum amount of time it should take for the valve to
home or prime. If the valve does not home or prime within the
Prime/Home Timeout parameter, Fluidmove will issue a Timeout
Error.
Allow Variable Valve
Speeds:
Activating this feature allows you to program different valve speeds
within the same dispensing program. If this feature is grayed-out, that
means it is not available on this type of dispensing system.
Figure 4-60 DP Series Valve Settings – General Tab