Owner's manual

System Configuration and Setup 4-63
Item Description
Enable Jet Cartridge Life
Limit Check:
When this is enabled, the number of jet cartridge cycles is checked
during setup. A warning is issued if the life limit has been exceeded.
Life Limit Cycles X 1000: Displays the life limit in thousands.
Jet Cartridge Info:
Opens the Jet Cartridge Information window where the operator can
view information such as type, description, nozzle size, seat size,
and cycle count.
Cycle Count:
When this is enabled, the current cycle count will be displayed on
the General tab.
Type Verification:
Fluidmove checks each of the following fluid file items during setup
and warns the operator for each mismatch.
1. The module type defined in the tag must match that defined in
the recipe.
2. The nozzle size defined in the tag must match that in the recipe.
3. The seat size defined in the tag must match that in the recipe.
4. The 30 character description (free text supplied by the
customer) defined in the tag must match that specified in the
recipe.
Runtime checks for these items are also made at the beginning and
end of a run.
Figure 4-57 NexJet Valve Settings – Jet Cartridge Tab