Owner's manual

4-56 System Configuration and Setup
The fluid file can be attached to a specific dispensing program to create a recipe that can be saved and re-
used. Fluid files may be used by more than one dispensing program; however, if you attach a single fluid
file to more than one dispensing program, changing the fluid file will affect all of the dispensing programs
to which it is attached.
A fluid file must be assigned to each valve. If your dispensing system is equipped with a Dual-Action
Dispensing Head, you can use the same fluid file for both valves. However, both valves will be affected if
you make any fluid parameter changes.
 NOTE Refer to 5.4.1 Fluid Setup for detailed instructions for setting up fluid files.
Figure 4-52 Fluid Manager Tabs
Flux Applications
Standard Applications