Owner's manual

System Configuration and Setup 4-53
4.3.10.13 Strip Mapping
FmXP provides users with the ability to use 2DID barcode recognition to designate the dispensable units
within an array of parts (presented on a strip). FmXP amends the production program to execute dispense
instructions only on those parts that are present. For more information, see 7.8 Strip Mapping.
To enable Strip Mapping:
1. In the Fluidmove Main Menu, select
Configuration > Setup Runtime Preferences > Strip
Mapping
.
 The Strip Mapping Setup window opens.
2. Click on
Enable to enable Strip Mapping.
 A checkmark in the box indicates Strip Mapping is enabled.
Figure 4-51 Strip Mapping Setup Window