Owner's manual

4-50 System Configuration and Setup
4.3.10.11 Electronic Pressure Control (E/P) Utility
If your system is configured with Electronic Pressure Control (E/P) regulators, this feature allows you to
adjust air pressure settings in Fluidmove.
Figure 4-48 Electronic Pressure Control (E/P) Utility
 NOTE To use this feature, the E/P Control Manager must be enabled.
To enable the E/P Control Manager:
1. Select
Configuration > Configuration Files from the Fluidmove Main Menu.
 The Edit Configuration Files window opens (Figure 4-49).
2. Click on the
FmConfig.ini tab.
3. Enable the E/P regulators.
a. Select
E/P Control Manager in the Configuration Groups section.
b. Click on
Enabled in the E/P Control Manager section.
c. Make sure
Enabled is set to ON. If not, click on the down arrow and select ON from
the list (Figure 4-49).