Manual

4-38 System Configuration and Setup
Vision System Setup
Setup Vision opens a dialog box where you can select the type of Vision System installed on your
dispensing system, calibrate the pixel size of the camera, identify the light source, define reticles if
desired, and establish parameters for locating fiducials.
1. In the Main Window, click on
Configuration.
2. Click on
Setup Vision.
!The Setup Vision dialog box opens. See Figure 4-21.
Figure 4-21 Setup Vision
3. Click on the arrow next to Vision System and select the type of Vision System installed on
your dispensing system.
!If you are not sure what type of Vision System is installed on your dispensing system,
contact Asymtek Technical Support.
4. Click on the arrow next to
Video Mixer and select the type of Video Mixer installed on your
dispensing system.
!If you are not sure what type of Video Mixer is installed on your dispensing system,
contact Asymtek Technical Support.