Manual

System Configuration and Setup 4-35
Scale Setup
If your dispensing system is equipped with a scale, in addition to defining the scale location described in
“Setup Purge/Scale Locations,” you must also configure the scale. Most Asymtek dispensing systems are
equipped with either a Denver Instruments DI-100 Series Scale or a DI-104 Series Scale.
" NOTE Consult the manual for your particular dispensing system if you are not sure
which scale model is installed. If your dispensing system is not equipped with a
scale, click on the arrow next to this box and select
None.
To set up the Scale:
1. Select
Configuration from the Main Menu.
2. Choose
Setup Scale.
!The Scale Setup dialog box shown in Figure 4-19 opens.
Figure 4-19 Scale Setup
" NOTE If your dispensing system is equipped with a DI 104 model scale, this dialog box
will have a DI-104 tab.
3. Enter the desired settings.
!Refer to Table 4-8 for a description of scale setup options.
4. Click
OK when done.