Manual

4-32 System Configuration and Setup
Setup Locations
Setup Locations is used for defining locations for the Purge Station and the Scale. If your system is
equipped with the dual-action Dispensing Head, you will have two Purge and two Scale Locations.
To set up Purge/Scale Locations:
1. In the Main Window, click on
Configuration.
2. Click on
Setup Locations.
!The Location Table dialog box opens. See Figure 4-17.
Figure 4-17 Setup Locations Table
3. Select the desired location from the list.
!The name of the location will appear in the text box.
4. Click
OK.
!The Dispensing Head moves to the selected location. A Teach Window opens.
5. Use the front panel Position Controls or the Teach Window Position Controls to move the
Dispensing Head to the desired location.
!The Jog Z feature can be used to automatically lower the Dispensing Head further once it
has settled over the programmed location.
6. When you are satisfied with the location, click on
Teach.
7. Click
Done.