Manual

System Configuration and Setup 4-27
Fluid Manager Setup
Fluid Manager allows you to set up a fluid file for each type of fluid used during production. The Fluid
Manager dialog box has tabs (Figure 4-14) for the following information:
 Purge Parameters
 Flow Rate Parameters
 Pot Life/Low Fluid Check information
 Attach Script File
Figure 4-14 Fluid Manager Setup
The fluid file can be attached to a specific dispensing program to create a recipe that can be saved and re-
used. If you attach a single fluid file to more than one dispensing program, changing the fluid file will
affect all of the dispensing programs to which it is attached.
If your dispensing system is equipped with a Dual-Action Dispensing Head, you can use the same fluid
file for both valves. However, both valves will be affected if you make any fluid parameter changes.
" NOTE Refer to “Fluid Setup” in the Programming Basics and Setup section for detailed
instructions on setting up fluid files.