Manual

4-22 System Configuration and Setup
E10 Equipment States
FmNT provides support for the SEMI E10 and E58 specifications, which describe six basic equipment
states that can be used to monitor the activity of a machine. FmNT now provides the ability to view,
change, and record these equipment states.
To record state changes in the FmNT log file, from the configuration menu on the main screen, select
Setup
Event Logging >Setup Logging Parameters. The E10 state selections are available when the
Configuration button is selected.
Table 4-4 E10 Equipment States
Description Abbreviation State Code Color
Productive PRD 1000 Green
Standby SBY 2000 Yellow
Engineering ENG 3000 Blue
Scheduled Downtime SDT 4000 Light Red/Pink
Unscheduled Downtime UDT 5000 Red
Non-Scheduled Time NST 6000 Dark Gray
Substates
SEMI E58 defines substates as consisting of four alphanumeric characters. The first character must be a
digit 1 to 6, indicating one of the six basic states above. The second character must be a digit 0 to 9. The
last two characters can be any alpha A to Z (lower or upper case) or any digit 0 to 9. The alpha characters
are case sensitive.
By default, FmNT does not use substates other than the “default” codes listed above. However, the
customer can customize the initialization file and manually enter substates if desired.
To set up E10 Equipment States:
1. Select
Configuration from the Main Menu.
2. Choose
Setup Runtime Preferences.
3. Click on
E10 Equipment States from the cascading menu.
!The E10 Equipment States dialog box opens. The Change/Lock Status tab is displayed.
See Figure 4-12.