Manual

System Configuration and Setup 4-11
4. Click the Vision tab.
!All related vision events are listed in the Events Section as shown in Figure 4-4. Enable
or disable logging for individual items in the
Events list by double-clicking directly on
the item. To see the events list for additional categories, click on a desired category.
Command Description
Suppress Log File Creation Suppresses the creation of log files.
Enable SPC Logging Activates the Event Manager and enables logging.
Check Disk Space
During Production
Click on Check Disk Space During Production to utilize the
Disk Space Configuration Limits for Trc/Dbg Logging. If this
feature is not activated, disk space will not be checked.
Enable All/Disable All
You can also enable or disable logging for all of the items in the
Events list by clicking on Enable All or Disable All.
Log Time
Click on Log Time to put a time stamp on each SPC file.
Log Date
Click on Log Date to put a date stamp on each SPC file.
Figure 4-4 Event Manager - Vision
To view an SPC file:
1. Open the Programming Window by selecting
Teach a Program from the Main Menu.
2. Select
View from the Menu Bar.
3. Select
Log File.