Manual

3-24 Tour of Fluidmove
Tools Window
The Tools Window is primarily used by service technicians. The Tools Window lets you communicate
directly with the major components of the dispensing system: the Dispenser, Conveyor, Scale, and Heater.
You can change various Personality Parameters for each component or use Tools as a diagnostic device.
You cannot run a program from the Tools window.
To access the Tools Window:
1. In the Main Window, click on
Tools.
!The Tools Window shown in Figure 3-19 opens.
!Notice the name of the currently selected jog device in the lower right hand corner of
the window.
Figure 3-19 Tools Window
2. Click on the desired button to access a list of options for that item. See Table 3-3 for a brief
description of the Tools Menu options.
" NOTE For detailed information, refer to the Tools section