Manual

3-10 Tour of Fluidmove
Production Window
The Production Window is primarily used by production operators. As well as running production, an
operator can perform many necessary setup functions through this window. At startup, FmNT loads the
last opened program file. The program name appears in the upper left hand corner of the window.
To open the Production Window:
1. Select
Run a Program in the Main Window to open the Production Window (Figure 3-5).
Load
Load activates the Open dialog box for opening and loading a dispensing
program file.
Setup
Setup activates menu containing a button for conducting a Prompted Setup,
and a list of options for a manual setup.
Run
Run activates a drop-down menu containing a button for initiating a
Production Run, and a list of options for different types of test runs.
Shut Down
The Shutdown button does not shut down the entire dispensing system. It
allows the operator to unload a board. To shut down a production run at any
time, use the Run Control Buttons in the lower right hand corner of Run
Window.
Jog
The Jog button opens a dialog box containing Position Controls for the
Dispensing Head and the Conveyor.
Main takes you back to the Main Window.
Figure 3-5 Production Window
Program Name
Selected
Jog Device