Manual

3-6 Tour of Fluidmove

Jog Window

The Jog Window, shown in Figure 3-3, lets you access position controls for moving the Dispensing Head

and the Conveyor(s).

1. To access the Jog Window, select

Jog from the Main Menu.

" NOTE The position controls can also be accessed from the Production Window, Run

Window, Programming Window, and Tools Window by clicking the

Jog

button.

2. Select the component you would like to move by clicking the button next to

Dispenser,

Conveyor 1, or Conveyor 2 (available only on systems equipped with dual Conveyors).

3. Move the selected device by clicking on the desired arrow key.

4. Click on

Reinitialize to reinitialize the selected device. Use this button if you are

experiencing communication problems with either the Dispensing Head or the Conveyor

Item Description

1 Target Box

2 Z-axis Controls (up and down movement)

3 Device Radio Buttons

4 X-axis Controls (side to side movement)

5 Y-axis Controls (forward and back movement)

Figure 3-3 Jog Window (Dispensing Head Position Controls Shown)