Manual

10-2 SECS/GEM Interface
Command Description
Control
Online Local - The Operator has control of the system. The system
will reject most host commands. The host can monitor operations,
but cannot control processing. In this state, the system will not
accept a REMOTE command from the host.
Online Remote - The host has control of the system. The Operator
may issue a Pause, Stop, or Abort command.
Offline - Takes the system Offline.
Communication
Enable - The SECS/GEM link with the host is established and
communication can take place.
Disable - The SECS/GEM link with the host is disconnected.
Spooling
Enable - Messages and commands will be spooled and resent if
the communications link between the host and the dispensing
system is temporarily disrupted.
Disable - Neither messages nor commands will be spooled and
resent if the communications link between the host and the
dispensing system is temporarily disrupted.
Get Date and Time Date and time synchronization from the host.
Figure 10-1 SECS/GEM Setup – Control Tab
Current
Settings