Manual

Running Production 8-13
Temperature Tab
The Temperature Status Tab, shown in Figure 8-11, lists the assigned names for each heater loop, the
temperature of each loop at the beginning of the production run, and the set point temperature of each
loop. The temperatures are NOT updated during the course of a production run, but are regulated
automatically by Heater Control.
Depending upon your system configuration, there may be more than one Temperature Tab.
Figure 8-11 Run Window - Temperature Status Tab
SECS/GEM Tab
The SECS/GEM Status Tab allows the operator to monitor SECS/GEM communications and is available
only on systems with the SECS/GEM option installed. For additional information, refer to the
SECS/GEM section.