Manual

8-8 Running Production
Run Production
To start a production run:
1. Click the
Run button.
!
The Run Production button appears in the Production Window, along with the manual run
commands shown in Figure 8-8.
" NOTE Clicking the Run Production button opens the Run Window. It does not start
the production run. To start the production run, you must click on
Go in the
Run Window (Figure 8-9).
Figure 8-8 Run Production
2. To execute one of the manual run commands, highlight the desired command. The manual
run commands are described in Table 8-1.
Table 8-1 Manual Run Commands
Command Description
Passthrough
Select this option to move a workpiece through the dispensing
area without performing any dispensing functions.
Production Dry Run
Select this option to perform a production run without
dispensing fluid.
Single Dry Run
Select this option to perform one complete run of the program
for one workpiece without dispensing fluid.
Single Wet Run
Select this option to perform one complete run of the program
for one workpiece.
Opens the
Run Window
Manual Run
Commands