Manual

Running Production 8-5
13. You will then be prompted to install a new needle, shield, etc.
14. Install a new needle, shield, etc., if necessary and click
Next.
!In this example Valve Offsets is the selected initial setup procedure. Refer to “Machine
Offsets” in the System Configuration and Setup section for instructions on selecting an
initial setup procedure.
15. Press
Done to run Valve Offsets.
!The screen shown in Figure 8-4 opens.
Figure 8-4 Original Prompted Setup - Valve Offsets
16. Refer to “Valve Offsets” in the System Configuration and Setup section for step-by-step
instructions on performing a Valve Offsets routine.
Scripted Prompted Setup
Scripted Prompted Setup is similar to the original Prompted Setup procedure, however you have the
option of selecting a script file at the beginning of a prompted setup. The script file customizes the setup
procedure to your particular dispensing system.
" NOTE Century and M-600 Series Dispensing Systems support the original Prompted
Setup routine, as well as Scripted Prompted Setup. M-2000 and X-1000 Series
Dispensing Systems support only Scripted Prompted Setup.