Manual

7-42 Advanced Programming
11. Make a mental note of the desired speed. Click on Done.
! You are now ready to set the valve speed in your dispensing program.
12. Move to the line above the weight control line just programmed.
13. Click on
Process button on the Programming Commands Toolbar.
14. Select
Set Valve Speed.
15. Enter
50.
! Your program should appear similar to the one in Figure 7-23.
VVS.fmw
Workpiece
1 SET VALVE SPEED: 50.00%; Valve 1
2 WEIGHT CONTROL: 10,000, 1, …
3END:
1
VVS.fmw
Workpiece
VVS.fmw
Workpiece
1 SET VALVE SPEED: 50.00%; Valve 1
2 WEIGHT CONTROL: 10,000, 1, …
3END:
1
1 SET VALVE SPEED: 50.00%; Valve 1
2 WEIGHT CONTROL: 10,000, 1, …
3END:
1
Figure 7-23 Variable Valve Speed Program