Manual

Advanced Programming 7-3
To create a pattern:
1. Click on the
Pattern button on the Program Commands toolbar. See Figure 7-2.
Figure 7-2 Creating a Pattern
2. Select Create Pattern.
! The Create Pattern Dialog Box will open. See Figure 7-3.
Figure 7-3 Create Pattern Dialog Box
3. Enter a name for the new pattern.
4. Select the fiducial setup alignment that best fits your pattern type.
5. If your pattern contains Skip Marks, activate the
Use Pattern Skip Mark feature.
" NOTE See “Skip Marks” later in this section for a detailed explanation of this feature.
6. Click
OK.