Manual

Beginning Programming 6-41
Editing the Main Program
" NOTE It is unlikely that you will need to edit the Main Program.
To edit the Main Program:
1. Perform the steps outlined in “Opening a Program and Pattern” above to open the desired
program.
2. Select
Edit>Edit Main Program from the menu bar.
3. Make the desired changes.
4. To return to the workpiece pattern, select
Edit>Edit Pattern-Workpiece from the menu bar.
Editing the Pre-Fiducial Block
Permission is required to edit the Pre-Fiducial Block. Contact Asymtek for more information. Once
permission has been obtained, follow the steps below to edit the block:
To edit the Pre-Fiducial Block:
1. Perform the steps outlined in “Opening a Program and Pattern” above to open the desired
program.
2. Select
Edit>Edit Pre-Fiducial Block from the menu bar.
3. Make the desired changes.
4. To return to the workpiece pattern, select
Edit>Edit Pattern-Workpiece from the menu bar.