Manual

Beginning Programming 6-37
Program Editing
After you have created your dispensing program, you may add, delete or edit existing program commands
as necessary. In addition, you can edit the fiducials defined for your workpiece. This subsection covers
the following topics:
Editing Fiducials Editing Program Commands
Opening a Program and Pattern Editing Dot and Line Location
Adding Program Commands Editing Dot/Line Style and Weight
Deleting Program Commands Editing the Main Program
Editing Fiducials
If the system fails to accurately find a significant number of fiducials during a production run, you may
want to redefine the fiducials.
To edit fiducials using the Model Finder:
1. Load the workpiece.
2. Select
Teach a Program from the Main Menu.
!The Workpiece pattern of the last saved program opens.
!To select a different program, choose
File>Open from the menu bar and select the desired
program from the list.
3. Make sure that the name of the pattern containing the fiducials you wish to edit appears in the
Pattern Name text box.
!If it doesn’t, click on the arrow next to the Pattern Name text box and select the pattern
from the drop-down menu.
!Refer to the Advanced Programming section of this manual for information on patterns.
4. From the
Edit menu select Edit Fiducial Info.
!A Teach Window opens.
!The Dispensing Head moves to the fiducial location.
5. Select
Model Finder.
6. Click on
Next.
7. Use the Position Controls to find your new fiducial.
8. Adjust the Model Size parameters if necessary.
9. Adjust the Accept Threshold and Confusion Threshold if necessary.