Manual

Beginning Programming 6-35
Figure 6-16 Valve Settings Dialog Box
4. Enter the desired valve speed.
!Higher values result in faster motor speed. Lower values result in slower motor speed.
5. Click OK.
" NOTE On dispensing systems with software controls for valve speed, the Set Speed
button will be functional. Click on
Set Speed to open a dialog box for
establishing valve speed during the Measure Flow Rate process.
Flow Rate Parameters
Flow Rate Parameters are defined in Fluid Setup and must closely resemble fluid dispensing conditions
during your production run. Flow rate parameters include:
Calibration Frequency
Dispense Duration and Time between Dispenses
Dispensed Weight Bias
Valid Flowrate Range
" NOTE For additional information, refer to “Fluid Setup” in the Programming Basics
and Setup section.
X-1000 Dispensing
Systems Only