Manual

6-14 Beginning Programming
To program a rectangle:
1. Click on the
Dispensing Elements button on the Program Commands toolbar.
2. Choose
Rectangle from the Dispensing Elements toolbar in the Teach Window.
3. Move the camera crosshairs to the lower left-hand corner (LLHC) of the rectangle on the
tutorial board and click
Teach.
4. Move the camera crosshairs to the opposite corner of the rectangle and click
Teach.
5. Click
Done.
!Line 5 of your program should look similar to the one below:
RECTANGLE: 1, (3.316, 3.857), (4.068, 3.353)
To program a pot:
1. Click on the
Dispensing Elements button on the Program Commands toolbar.
2. Choose
POT from the Dispensing Elements toolbar in the Teach Window.
!The Teach Pot Window will open.
!Notice that the Teach Window has additional text boxes below the video display for pots.
See Figure 6-5.
Figure 6-5 Teaching a Pot
3. Click the checkbox next to Weight Control to activate that feature and enter 20 for the weight.