Manual

6-4 Beginning Programming
Dispensing Elements
There are several fundamental dispensing elements and patterns that form the foundation for all
dispensing applications. These include:
 Dots  Lines
 Arcs  Circles
 Rectangles  Pots
 Area Fill  Spiral Fill
 Weight Control Lines  Weight Control Fill
 Find Substrate Height  Pattern
 Select Valve  Multipass
 Coat Dot  Coat Line
 Coat Grid  Dot Grid
When you select
Dispensing Elements from the Program Commands Toolbar, a Teach Window
opens. The Teach Window contains the Dispensing Elements toolbar, shown in Figure 6-3. Select the
desired Dispensing Element by clicking on it. You will be then be prompted through the remainder of the
programming process for the dispensing element selected.
Figure 6-3 Dispensing Elements Toolbar
Dot
Arc
Rectangle
Area Fill
Weight Control
Line
Find Subsrate
Heigh
t
Select
Valve
Coat Dot
Coat Grid
Line
Circle
Pot
Spiral Fill (not
available)
Weight Control Area
Fill (not available)
Pattern
Coat Line
Dot Grid
Multipass