Manual

4-56 System Configuration and Setup
Figure 4-29 Valve Offsets
5. Click on Run next to “1. Teach Safe Z.”
!A Teach Window opens.
6. Activate the Z-axis Controls.
7. Raise or lower the Dispensing Head until it reaches a safe Z height.
8. Click on
Teach.
9. Click on
Done.
!The Teach Window closes and you return to the Setup dialog box. Notice that the box
next to number 1 now has a check mark (9) in it to indicate that Step 1 is complete.
10. Click on
Run next to “2. Teach Purge Location.”
!The Dispensing Head moves to the Home position and then moves to the Purge Station.
!A Teach Window opens.