Manual

4-46 System Configuration and Setup
Scanner Setup
Scanner Setup allows you to identify the type of barcode scanner installed on your dispensing system.
To set up the scanner:
1. In the Main Window, click on
Configuration.
2. Click on
Setup Scanner.
!The Scanner dialog box opens. See Figure 4-24.
Figure 4-24 Setup Scanner
3. Click on the arrow next to Type to select the type of Scanner installed on your system. If
there is no scanner installed, select
(none).
4. Click on
Enable to actively use the scanner. Click on Disable to deactivate the scanner.
5. Select the desired options under the
Barcode Type.
!The tabs in the Barcode Types section can be used to give FmNT the flexibility to use
different types of bar codes.
!Currently, FmNT only supports one type of scanner. The default setting for Barcode Type
is Code 39. The check box next to Enable Code 39 should have a check mark in it. If it
does not, click on the box to enable Code 39 before using the scanner.
!Selecting additional options under Barcode Type may increase scanning time.