Instruction Manual

Programming Basics 7-3
Look at the following program instructions in Figure 7 -1. Specific pattern program lines are displayed
separately. Only the instructions for the currently selected pattern are displayed in the programming
screen. The currently selected pattern is indicated in the Pattern Name text box. As shown, the currently
selected pattern is Workpiece. The instructions for Workpiece shown in the programming screen are
function calls to a sub-pattern called “chip 1.” To display the instructions for chip 1, you would select
chip 1 from the Pattern Name text box.
Item Description
1 Pattern “Workpiece” Instructions
2 Function Call to do “chip1”
3 Pattern “chip1” Instructions
4 Pattern Name Text Box
Figure 7 -1
1
4
3
2