Instruction Manual

Getting Started 1-1
1 Getting Started
Welcome to Fluidmove for Windows NT (FmNT).
In most cases, FmNT should arrive already installed and configured for your dispensing system. If you
should need to re-install FmNT, refer to the Installation section of this manual.
Overview
This manual is an instructional guide designed for system operators, computer programmers and process
engineers. It provides a complete tour of the Fluidmove software with detailed explanations of all
features.
The tutorials in this manual are designed to teach you specific programming techniques. The first lessons
teach basic elements used to build more complex patterns. Advanced lessons teach you how to program
entire workpieces and add process commands. The estimated time to successfully complete each lesson is
identified. The tutorials are also included in the FmNT Online Help.
Supplied with this manual are Asymtek Tutorial Boards which will be used for the dispensing exercises.
? NOTE This manual is intended for use with Fluidmove for Windows NT release 4.4 or
higher.
Safety
Please review the Safety section of the Operations Manual for your particular dispensing system before
proceeding. It is important for you to familiarize yourself with the safety features and precautions
identified in the Operations Manual before attempting the tutorials in this manual.