Instruction Manual

6-28 Setup and Configuration
Programming Setup
Before you begin a programming session, it is recommended that you perform a Prompted Setup
procedure. Also, before creating a dispensing program, you should visit the Configuration menu to setup
your workpiece and fluid file, which is used to keep track of fluid characteristics and statistics.
Fluid Files
Fluid files record information about the dispensing fluids used in your programs. If all of your dispensing
programs use the same fluid, you can attach the same fluid file to all of the programs. However, a
different fluid file should be created for each type of fluid used. Fluid files are stored in the Fluid folder
under the FmNT root directory as
<filename>.flu files.
?NOTE Remember, if you attach a single fluid file to more than one dispensing program,
changing the fluid file will affect all of the dispensing programs to which it is
attached.