Instruction Manual

6-16 Setup and Configuration
Vision System Setup
If the Vision System has not been calibrated since FmNT was initially installed, you will receive a notice
when FmNT starts, indicating that the Vision System has not been calibrated.
If the camera or any part of the vision system has been changed or upgraded, the Vision System will need
to be re-calibrated. It is also a good troubleshooting routine to perform if you are having trouble
identifying fiducials, corners or see an accuracy problem during dispensing.
To calibrate the Vision System:
1. In the Main Window, click on
Configuration.
2. From the Configuration menu, select
Setup Vision.
> The Vision Parameters dialog box in Figure 6-10 opens and displays the parameters
configured for your system at installation.
Figure 6-10