Instruction Manual

Setup and Configuration 6-11
Preferences
User Preferences for FmNT are located on the Configuration menu in the Main Window. The list below
identifies the customizable preferences available. You may change these preferences at any time.
Use (inches, mm or machine units)
All measurements in FmNT will be
displayed in your choice of units.
Change Operator Level
FmNT limits access to menus by use of
this option. This option works in
conjunction with Setup Password.
Setup Event Logging
FmNT gives you the option of logging
the process events that you choose here.
Setup Password
Use this dialog box to set user access
level passwords.
Units
Choosing a Unit determines how measurements will be displayed in FmNT. The available units are
inches, millimeters or machine units. Machine units can vary slightly from one machine to another but
are defined as a single step, or the smallest increment that the X, Y or Z motor can move.
To set Units:
1. In the Main Window, click on
Configuration to access the drop-down menu.
2. Select
Setup Units from the Configuration menu.
3. Move the cursor to one of the
Use (units) options and click on it.
> A check mark (ü) appears next to the selected Unit.