Instruction Manual

6-8 Setup and Configuration
27. Select Setup Conveyors from the Configuration menu.
> The Setup Conveyors dialog box opens. See Figure 6-6.
Figure 6-6
28. Click on the arrow next to the Type box and select the type of conveyor installed on your
system.
> Most Century and Millennium Series Dispensing Systems use Automove to
communicate with the conveyor. If you are using a non-Asymtek conveyor, select
Custom. MPC555 is used on the X-1000 Series Dispensing System. Contact Asymtek
for more information. If your dispensing system is not equipped with a conveyor, select
(none).
> If your dispensing system is equipped with a dual-lane conveyor, you need to select the
conveyor
Type for Conveyor 2 as well.
29. To select the exact conveyor style and conveyor atom to use on your dispensing system, click
on
Configure in the Setup Conveyors dialog box.
> The Setup Configuration–Conveyor dialog box opens. See Figure 6-7.
?NOTE If you selected MPC555 for the conveyor Type, Figure 6-7 will look very
different. Refer to the Axiom X-1000 Series Operations Manual or the FmNT
Online Help for details.