Instruction Manual

6-4 Setup and Configuration
7. Click on OK.
8. In the Main Window, click on
Configuration.
9. Select
Setup Valves from the Configuration menu.
> The Setup Valves dialog box opens. See Figure 6-2.
Figure 6-2
10. If the type of valve installed on your dispensing system is not automatically highlighted in
the
Active Configuration box, use the mouse or trackball to select your valve from the list.
> Consult the valve manual included with your dispensing system for help identifying the
type of valve installed on your dispensing system, if necessary.
> Clicking on Edit takes you to the Valve Settings dialog box where you can configure
specific settings for valve operation, including valve speed and fluid pressure.
> Delete and New allow you to remove valve types no longer used on your dispensing
system or add new valve types if you upgrade to a newer valve not already included in
this list.
11. Click on
OK.
?NOTE A message box opens indicating that you must restart FmNT for the new changes
to take effect. You are also asked if you want to restart FmNT now. You do not
have to restart FmNT until you have finished configuring the dispensing system.
12. Click on
No every time you see this message until System Configuration is complete.