Instruction Manual

Setup and Configuration 6-3
To configure the dispensing system:
1. Start FmNT.
> Refer to “Starting FmNT” in the Tour of Fluidmove section in this manual for help.
2. In the Main Window, click on
Configuration.
3. Select
Machine Offsets from the Configuration menu.
4. Select
Machine Offsets Parameters from the drop-down menu.
> The Machine Offsets Parameters dialog box opens. See Figure 6-1.
Figure 6-1
5. Click on the arrow next to the Sensor Type text box to view all available options.
6. Select the appropriate Needle Sensor type for your system.
> Consult the Online Help or the Needle Sensor section of your Operations Manual for
help identifying the type of Needle Sensor installed on your system.