Instruction Manual

6-2 Setup and Configuration
System Configuration
CAUTION! The System Configuration procedure should be performed by trained service
personnel only.
After installing your dispensing system, or after installing FmNT, it is necessary to identify certain
options included on the system platform. These options include, but are not limited to, the following:
• Needle Sensor
• Valve(s)
• Low Fluid Sensor(s)
• Height Sensor
• Scale
• Vision System
• Conveyor(s)
• Heaters
?NOTE Generally, System Configuration is performed at the Asymtek factory prior to
shipping, and you may never have to perform this procedure. Contact Asymtek
Technical Support for more information.
?NOTE Advanced service engineers or Asymtek Field Service engineers may perform
the entire System Configuration procedure by editing the Configuration Files
through the Configuration menu in the FmNT Main Window.
Help You can access the Online Help from all windows and dialog boxes for
additional information, if necessary.
Estimated time to complete: 20 minutes