Instruction Manual

SECS/GEM Interface 5-1
5 SECS/GEM Interface
FmNT can be configured to interface with a GEM system. This is a factory-set option. Your dispensing
system may not have a SECS/GEM interface option. If it does not, your SECS/GEM interface button in
the FmNT Main Window will be grayed and disabled.
Below is a description and tour of the user interface for the SECS/GEM option. It is intended as an
Operator Guide. Detailed interface programming information and terminology are contained in the
SECS-GEM Interface Option for Fluidmove for Windows NT Reference Manual.
To explore the SECS/GEM interface:
1. In the Main Window, click on
SECS/GEM.
> The SECS/GEM Setup Window opens to the
Control tab. See Figure 5 -1. In the Control
tab, the Programmer can use the Control buttons to toggle the Control State. Otherwise,
the system uses the default settings on the
Setup tab.
> Also, the Programmer can click on the
Communication buttons to toggle the
Communication State. Otherwise, the system uses the default settings on the Setup tab.
> To get date and time synchronization from the host, click on
Get Date & Time.
Figure 5 -1