Instruction Manual

Tour of Fluidmove 3-11
Jog Commands
The Jog Commands, shown in Figure 3-7 are Position Controls for the dispensing head and the
conveyors. These commands can be accessed from all major windows. To move the dispensing head
forward, backward, left or right, click on one of the X-Y arrows. To move the dispensing head up or
down, click on the Z arrows. To move rapidly in X, Y or Z, click on the double arrow buttons.
To move the conveyor rail or belt, click on Conveyor 1, and then an arrow. The left and right arrows
move the conveyor belt. The up and down arrows move the rear conveyor rail. The Z arrows are not used
with the conveyors.
Each click on the Position Control arrows for up, down, left or right moves the dispensing head or
conveyor belt or rail a specific distance. You can configure this distance by clicking on
Config and
specifying a value in the appropriate text box. Click on
Help to access the Online Help for more
information.
Figure 3-7
Click on the X in the upper right hand corner to close the Jog Commands.
Click on Main in the Tools Window to return to the Main Window.