Instruction Manual

Beginning Programming 8-9
4. Type 20 mg in the Total Weight text box.
> Entering 20 mg means that 20 mg of fluid will be dispensed along the length of the line
you will now define.
5. Move the camera crosshairs to the beginning of the top Basic Line on Side 1 of the Tutorial
Board.
6. Click on
Teach.
7. Move the camera crosshairs to the end of the line.
8. Click on
Teach.
9. Click on
Done.
> A message box opens, indicating the calculated line speed for the newly created weight
control line.
10. Click on
OK.
> The Workpiece Pattern program should look like this:
1 WEIGHT CONTROL: 20.000, 1,...
2END
> 20.000 is the weight of the line. 1 is the Line Style used for this line.
11. Repeat Steps 2, 3 and 4, and type in 25 mg for the next line.
12. Move the camera crosshairs to the beginning of the next line on the Tutorial Board.
13. Click on
Teach.
14. Move the camera crosshairs to the end of the line.
15. Click on
Teach.
16. Click on
Done.
> A message box opens, indicating the calculated line speed for the newly created weight
control line.
17. Click on
OK.
18. Repeat Steps 2, 3 and 4, and type in 35 mg for the next line.
19. Move the camera crosshairs to the beginning of the last line on the Tutorial Board.
20. Click on
Teach.
21. Move the camera crosshairs to the end of the line.
22. Click on
Teach.