User Manual
Setup and Configuration 6-11
Preferences
User Preferences for FmNT are located on the Configuration menu in the Main Window.
The list below identifies the customizable preferences available. You may change these
preferences at any time.
Use (inches, mm or machine units)
All measurements in FmNT will
be displayed in your choice of
units.
Change Operator Level
FmNT limits access to menus by
use of this option. This option
works in conjunction with Setup
Password.
Setup Event Logging
FmNT gives you the option of
logging the process events that
you choose here.
Setup Password
Use this dialog box to set user
access level passwords.
Units
Choosing a Unit determines how measurements will be displayed in FmNT. The available
units are inches, millimeters or machine units. Machine units can vary slightly from one
machine to another but are defined as a single step, or the smallest increment that the X, Y or
Z motor can move.
To set Units:
1. In the Main Window, click on Configuration to access the drop-down menu.
2. Select Setup Units
Setup UnitsSetup Units
Setup Units from the Configuration menu.
3. Move the cursor to one of the Use
UseUse
Use (units) options and click on it.
> A check mark (ΓΌ) appears next to the selected Unit.