User Manual

Setup and Configuration 6-9
Figure 6-7
30. Click on the arrow next to the Style
StyleStyle
Style box to view the entire list of conveyor types.
> A brief description of each conveyor type appears in the box below the Style
StyleStyle
Style
box.
?NOTE The selected conveyor Style determines the name of the Conveyor
File used during operation. Conveyor operation is partly controlled
by an established set of commands stored as a filename.acl file.
The .acl file is automatically downloaded to the Conveyor
Controller Module during FmNT start-up. Refer to the Operations
Manual for more information.
> Refer to the Online Help for detailed descriptions of each feature in this dialog
box.
31. Click on OK.
> The Setup Configuration–Conveyor dialog box close and you return to the
Setup conveyors dialog box.
32. Click on OK.
33. In the Main Window, click on Configuration.
34. Select Setup Heaters
Setup HeatersSetup Heaters
Setup Heaters from the Configuration menu.
> The Heater dialog box opens. See Figure 6-8.