User Manual

6-4 Setup and Configuration
Figure 6-2
10. If the type of valve installed on your dispensing system is not automatically
highlighted in the Active Configuration
Active ConfigurationActive Configuration
Active Configuration box, use the mouse or trackball to select your
valve from the list.
> Consult the Valve section of your Operations Manual for help identifying the
type of valve installed on your dispensing system, if necessary.
> Clicking on Edit takes you to the Valve Settings dialog box where you can
configure specific settings for valve operation, including valve speed and fluid
pressure.
> Delete and New allow you to remove valve types no longer used on your
dispensing system or add new valve types if you upgrade to a newer valve not
already included in this list.
11. Click on OK.
?NOTE A message box opens indicating that you must restart FmNT for the new
changes to take effect. You are also asked if you want to restart FmNT now.
You do not have to restart FmNT until you have finished configuring the
dispensing system.
12. Click on No every time you see this message until System Configuration is complete.
13. In the Main Window, click on Configuration.