User Manual

Tour of Fluidmove 3-11
Jog Commands
The Jog Commands, shown in Figure 3-7 are Position Controls for the dispensing
head and the conveyors. These commands can be accessed from all major windows.
To move the dispensing head forward, backward, left or right, click on one of the X-Y
arrows. To move the dispensing head up or down, click on the Z arrows. To move
rapidly in X, Y or Z, click on the double arrow buttons.
To move the conveyor rail or belt, click on Conveyor 1, and then an arrow. The left
and right arrows move the conveyor belt. The up and down arrows move the rear
conveyor rail.
Each click on the Position Control arrows for up, down, left or right moves the
dispensing head or conveyor belt or rail a specific distance. You can configure this
distance by clicking on Jog Config and specifying a value in the appropriate text box.
Consult the Online Help for more information.
Figure 3-7
è Click on the X in the upper right hand corner to close the Jog
Commands.
è Click on Main in the Tools Window to return to the Main Window.