User Manual

7-4 Programming Basics
Look at the following program instructions in Figure 7 -1. Specific pattern program lines are
displayed separately. Only the instructions for the currently selected pattern are displayed in
the programming screen. The currently selected pattern is indicated in the Pattern Name text
box. As shown, the currently selected pattern is Workpiece. The instructions for Workpiece
shown in the programming screen are function calls to a sub-pattern called “chip 1.” To
display the instructions for chip 1, you would select chip 1 from the Pattern Name text box.
Figure 7 -1
Pattern Name
Text Box
Function call to do
p
attern “chip1” at
this location.
Pattern
“chip1
”
Instructions
Pattern
“Workpiece
”
Instructions