User guide

4 Introduction
Tools and Materials
The following tools, materials, and documents are needed to install, operate, and maintain the FMS:
• Flow Monitoring System Kit, P/N 198007
• Century C-740/C-741 Installation, Operations, and Maintenance Manual
• Century C-740 or C-741 Dispensing System with Windows XP or Windows NT 4.0, Service
pack 6a or higher
• Swirl Coat or SC-205 Film Coater and manuals
• Easy Coat User Guide, Version 2.5 or higher
• Easy Coat Help Files
• Material Safety Data Sheets (MSDS) for the selected solvents and coating material
• Personal Protective Equipment (PPE) as recommended in the MSDS
• Flathead screwdriver
• Phillips screwdriver
• Adjustable wrenches
• Metric Hex Wrench set
• Tie-Gun (cut/install cable tie-wraps)
• Tweezers (plastic preferred)
• Torque-wrench, Newton-meter
• Multimeter (Continuity, AC/DC Voltage 0 to 280V, Resistance, 0 to 7 Ohm)
• Fluid container (for soaking, drainage of solvents/coating fluids)
• Clean, lint-free, shop cloth
• Nozzle bristle-brush
• Consumables: solvents, cleaning fluids, pipe tape, tie-wraps
• Disposables: PPE gloves, cups, wipes