User guide

Parts Replacement 31
Credit and Exchanges
Contact Asymtek Customer Service for credit or exchanges of recommended spare parts or refurbished
components (components restored to original specifications but not sold as new).
Return Material Authorization
Contact Asymtek Technical Support to obtain a Return Material Authorization (RMA) before returning any
parts.
" NOTE Find your local Technical Support and Customer Service contacts on the Asymtek web
site,
www.asymtek.com. Click on Tech Support or Contact Us.
Cleaning and Inspection
Always clean the area made visible after a failed part is removed from the dispensing system. Inspect the
area for signs of what may have caused the part to fail. This may help prevent future part damage.
While removing parts that will be reinstalled, visually inspect them for damage. If found undamaged,
retain them for reinstallation. Replace damaged parts and hardware as appropriate.
Unpacking and Inspecting Replacement Parts
Replacement parts are shipped to distributor or Customer facilities in individual shipping cartons. Review
the packing slip to ensure that the correct parts were received. Contact Asymtek Technical Support if any
discrepancies are discovered.
Before unpacking your spare parts, visually inspect the carton for damage. If applicable, check the
ShockWatch and the Tip N’ Tell stickers for indications of improper shipping and handling. Inform the
freight carrier of any damage.
Parts List
Table 7-1 Flow Monitoring System Parts List
Part
Number
Description
of Part
Quantity per
Configuration.
Unit of
Measure
195795 Flow Meter w/ CPC 1 Each
973037 Nipple, ¼-in. x ¼-in. NPT Steel 1 Each
195750 Card, Multi-function I/O 1 Each
198008 Bracket, Flow Meter 1 Each
197411 Cable, Flow Meter, VSE 1 Each
Table 7-2 Spare Parts List
Part
Number
Description
of Part
Quantity per
Configuration
Unit of
Measure
195752 Wheel, Gear, Flow Meter 2 Each
195753 Bearing, Ball, Flow Meter 2 Each
7211724 O-ring, Teflon, Flow Meter 1 Each
195754 Shim, Flow Meter 4 Each