User guide

22 Maintenance and Service
4. Disconnect the fluid lines and remove the elbow fittings (Figure 5-2).
CAUTION! Avoid accidental spills of solvent or coating material during removal that could
damage the dispensing system.
5. Use a hex wrench to remove the two screws that secure the flow meter to the bracket and
remove the flow meter from the bracket.
6. Drain residual fluids from the flow meter threaded holes from each side.
Item Description
1 Elbow Fitting
2 Bracket
3 Fluid Line
Figure 5-2 Disconnecting the Fluid Lines and Elbow Fittings
1
3
2