User guide

Installation 7
3 Installation
Overview
This section covers the initial installation process for the Flow Monitoring System (FMS) and includes the
following topics:
•
Installing the Computer Interface Board
•
Installing the Flow Meter and Cables
•
Installing the DriverLINX Software
•
Configuring the DriverLINX software
•
Configuring the Easy Coat Software
" NOTE In most cases, the FMS should arrive already installed and configured for your
dispensing system from the Asymtek factory.
Safety First
Please familiarize yourself with the Safety sections of this manual and the C-740/C-741 Installation,
Operations, and Maintenance Manual before installing the FMS.
WARNING! Disconnect and lock out power to the Dispensing System and adjacent systems
connected to the Dispensing System such as loaders and ovens before
installation. Failure to do so may result in serious personal injury or death.
CAUTION! Only trained personnel should install the Flow Monitoring System.
"
NOTE If supplied as a kit, open it and review the contents of the kit with the enclosed packing
list. Refer to Section
7 - Parts Replacement if any item is missing or damaged.