Manual

Programming 5-9
5.7.2 Product Frame
Product Frames (See Figure 5-4, Rectangle B) exist within the Base Frame. ECXP uses fixture constraint
coordinates, plus the length and width of the product, to calculate the coordinates of the Product Frame
within the Base Frame. The Product Frame origin is the calculated Main Pattern Edit Frame.
 NOTE A product can be a board or a pallet (carrier) containing one or more boards. If a pallet
is used, the dimensions of the pallet are used to calculate the Product Frame.
5.7.3 Pattern Frame
The origin coordinates of patterns (See Figure 5-4, Rectangle C) other than the Main Pattern are
expressed as a set of coordinates in the Product Frame. The pattern origin coordinates are stored in the
Pattern Edit Frame when the pattern is created.
5.8 Properties
Every program, pattern, procedure, mask region, and instruction has properties. Properties include items
such as the fixture, pattern coordinates, and instruction approach height, etc. The Property list displays the
properties of the selected item and allows you to change the properties. See Figure 5-5.
Figure 5-5 Program Properties
Program
Property
List
Main
Pattern
Property